Patriot Homecare Bed Semi-Electric

The motor unit and bed design provide the ultimate in quiet, smooth operation.

Complete welded steel frame construction.

The head and foot sections can be raised or lowered simultaneously or independently with one hand control.

During a power failure the motor unit can lower both the head and foot section with just a single standard 9 volt battery.

Assembles easily with just five components.

Designed to meet the requirements of applicable HCPCS codes.

Total bed weight assembled: 166 lb (bed and motor only).

Available with Fiberboard Decorative Walnut Bed-ends or

High-impact Plastic Bed-ends.

Maximum patient weight 350 lbs.

450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.

Bed Height: Min. 15", Max. 24" (at deck level).

Lift Range: Head - 60°, Knee - 30°.

Overall Bed Size: 87" L x 36" W.

No external pinch points!

Slots in frame to ensure proper rail placement.

Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.

Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking. Bed length will be 84" with one kit, 88" with 2 kits.

The only homecare bed to offer optional corner mattress retainers .

Grid Deck offers the following advantages:

Much stronger frame.
Better mattress support.
No spring sag or bottoming out with heavier patients.
Easier to clean.
No connecting links or springs to lose.

Warranty:

Two year warranty for defects in workmanship and materials of techanical components, frame, and electronics.
During the warranty period, defective items will be repaired or replaced at manufacturer’s option. The warranty does not include any labor charges incurred in replacement part(s) installation or any associated freight or shipping charges to the manufacturer.

Bed shipped in three cartons:

1. Foot section and motor.
2. Head section and Hi/Lo rod.
3. Bed end set.

Skus

Please note that the pictures and descriptions on this page are representative of the product class. The stock codes below may be the product itself, or they may be associated stock codes related to the product being displayed. Please read the stock code description below to ensure you are ordering the correct item. Please call customer service if you have any questions regarding the correct stock code to choose.

Specifications

Additional Information

Product Documents

			Product Sheet - Patriot Semi-Electric Homecare Bed
			Manual - Patriot Homecare Bed
			DMEPDAC Approval Letter US0208.pdf

Introducing the new Patriot Semi-Electric Homecare Bed with a grid sleep surface!
Designed and engineered by the same team who develop the GF Long Term Care beds.
Sleep surface and motors are MADE IN THE USA!

Bariatric Bed

ABL-B600 Full-Electric Bed Only 1 ea

Full-electric, three-function operation.
UL 73 and CAN/CSA C22.2 No. 68-92 approved.
Designed to meet the requirements of applicable HCPCS codes.
Split-frame with removable ends for easy transport.
Heavy-duty grid sleep deck.
Swing-down style trigger release rail (optional).
High-strength, steel-reinforced, truss frame.
Durable powder-coated finish.
Simple assembly: no special tools required.
Self-wrenching nut: assembled for easy part replacement.
Ball-screw bed ends.
Maximum patient weight is 600 lbs.
700 lb evenly distributed total weight capacity including the patient, mattress, rails and accessories.
Bed height: low 17" to high 27".
Overall bed dimensions: 46.5" width (with rails) and 87" length.
Sleeping surface dimensions: 42" width and 80" length.
Also available as a package with 650-1501-000 bariatric mattress and A7040 head half rails.

Warranty:

Two year warranty for defects in workmanship and materials of mechanical components, frame, and electronics.

During the warranty period, defective items will be repaired or replaced at manufacturer's option at no charge.

Skus

Additional Information

Product Documents

			Product Sheet - Bariatric Bed
			User Manual - Bariatric Bed (Service Parts: Page 21)
			DMEPDAC Approval Letter ABL-B600.pdf

Universal Homecare Bed

Frame is constructed of 10-gauge high-strength, low-alloy, cold-rolled steel for added strength.
The head spring section is reinforced on each side to prevent racking and bending.
All actuators use free wheeling (slip) clutches to eliminate the problems associated with unsynchronized components.
Self-wrenching nuts are used on all sleeping deck pivot points, making repairs easy to accomplish, and yielding “Good as New” results.
Casters are 3": 2 locking and 2 non-locking.
All motors are 1/10 HP, 115 Volts/60 Hz, 1.6 amps and are protected from damage caused by misuse of the hand pendant via an override protection switch.
Vinyl-clad capping on bed ends is durable and mar-resistant.
All beds accommodate 36" x 80" mattresses.
Designed to meet the requirements of applicable HCPCS codes.
450 lb maximum weight capacity.
Also available as a package with GF1500-180 80" innerspring mattress and either GF6570A-1 full rails or GF6650A-1 head half rails.
UL 73 and CAN/CSA C22.2 No. 68-92 approved.

Warranty:

Two year warranty for defects in workmanship and materials of mechanical components, frame, and electronics.
During the warranty period, defective items will be repaired or replaced at manufacturer's option at no charge.

Skus

Additional Information

Product Documents

			Product Sheet - Universal Homecare Bed
			User Manual - Universal Homecare Bed
			Replacement Parts - Universal Homecare Bed

Intro Bed

Rigid low bed is designed to be safe and affordable.

Low height of 9.5" to 20.25"
450 lb Dynamic Rated capacity
Meets FDA Entrapment guidelines
Locked when raised and rolls at low height
Locking Casters at all four corners
Back Mattress Deck articulates to approx 70 degrees
Knee Mattress Deck articulates to approx 30 degrees

The Intro and all Long Term Care Beds are sold a la carte; Head and Foot boards, Assist Devices, Mattresses and all options/accessories are sold separately.

Additional Information

Product Documents

The Intro.pdf

ALPHA II™

The Alpha II offers a broad travel range – from 8.9" low height for resident safety to 30" high height for caregiver convenience. The low height allows residents to get in and out of bed easier while also reducing the risk of injury from a fall. With a low height, the need for restraints is less. The high height adjustment helps caregivers assist residents when transferring in and out of bed. Caregivers can also benefit from high height by aiding residents with eating, dressing and other daily activities. The highest position also provides caregivers with a safe working environment which helps reduce back injuries and strains.

Features:

Strong Supportive grid deck is superior in frame design and offers a “no-sag” mattress support surface

Patent pending design keeps bed level and balanced at all times providing a more comfortable, restful sleep

8.9 inch to 30 inch travel speed allows for bed positioning in as little as 22 seconds ...faster than most of the competition.

Straight vertical travel takes up less room space

Quiet, Smooth operation by using four DC motors.

360 degree mobility at ANY height – can move from room to room at any height even the lowest.

Adjustable Leg lift system comes standard with Alpha II for improving comfort for residents with edema and poor leg circulation

Structured Base provides a reinforced, robust, base that is designed for support yet sufficient underbed clearance, ideal for using overbed tables and patient lifts

Wall Saver is adjustable for close positioning to walls and keeps your walls scratch free

Designed to support the use as a transport device, ideal for Sub-Acute and Rehab facility needs

Other features of the Alpha II as a long-term care beds that address the needs of both caregivers and residents:

Resident controls allow for independence, comfort and security

Wallsaver Bumper Boards to protect walls

Corner Mattress Retainers

Easy-to-use controls with advanced staff control options available

Strong tubular head/foot board mounting can be used also as push bar

Compliant to industry regulatory bed standards

Highest Safety and Quality Standards
Built to conform to UL 60601-1 and IEC601-2-38, CAN/CSA C22.2 No. 601.1 the Liberty Bed offers the following ensuring the utmost resident and staff safety:

No pinch points within 200mm of bed perimeter

Rolling clearance of 20mm over thresholds

Splash-proof electronics

Load capacity and tip-stability testing

And For Infection Control…
Introducing SilverSolutions!

Superior, high efficacy that protects painted surfaces

Antimicrobial kills more than 99.9% of odor and stain causing bacteria

Lasts for the expected life of the bed

Non-allergenic and safe for the environment

High concentration of silver ions gives high efficacy

Requires no special handling

A cost-effective solution that is built-in to last

Accessories & Options
Extension Kit - Transform your bed to 84” improving inventory management of beds. Extension accommodates for a more broad range of resident heights.
Trapeze adapter allows for easy attachment of trapeze system to headboard with easy reach for residents.
Pendant Hand Control - Easy operation contoured Hand Control Pendant is shock-resistant, water-proof and durable. Holster conveniently secures to bedrails and assist devices for easy access. Backlit hand control with underbed light is optional.
Lok-n-Roll option provides a one-step locking system that is easily accessible even with low bed height
Deluxe casters for enhanced mobility
Battery Back Up provides the ability to perform bed functions in the event of power outage
Staff Control - Optional Embedded Staff Control allows staff to operate bed functions from the footboard. Staff can restrict access to the resident by locking out control from the resident pendant.
Half Length Assist Device and Assist Bar provide a sturdy and secure handhold to assist residents in and out of bed. Assist devices are removable without tools and meet FDA Entrapment Guidelines.

Basic American Alpha II Specifications
Additional Features Include:
– Electrostatic power coated antimicrobial bed surface provides longer lasting, durable finish
– Hospital Grade Grounded Plug is Standard
– U.S. Patents - US 7, 421, 748 1
– Multiple Patents Pending

Eze-Lok™

This bed represents a true engineering breakthrough, combining long term care needs with acute care features. The Eze-Lok™ bed features a single pedal to secure the bed to the floor at any sleep surface height. The color-coded pedals show green for mobile and red for securely-locked.
• 12" Low deck height. Maximum height is 24".
• Available in Manual Hi-Lo, Semi-Electric and Full-Electric.
• Available with spring, grid, or pan sleep deck.
• Durable powder-coated epoxy finish.
• 450 lb weight capacity.
• UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
• Available in 76", 80", or 84" sleep deck lengths.
• Warranty:
1. Electronics: 2 Years
2. All other components: 15 Years.

The Eze Lok and all Long Term Care beds are sold a la carte; Head and Foot Boards, Assist Devices, mattresses and options/accessories are sold separately.

Additional Information

Product Documents

Eze-Lok.pdf

LIBERTY BED

Our newest addition from Basic American, The Liberty Bed provides you with the key features you want at a very affordable price point.

Strong supportive grid deck is superior in frame design and offers a “no-sag” mattress support surface. 450 lb. weight capacity.

Range of motion 9.9 inch to 24.4 inch. With a standard 6” mattress, this positions the bed at an ideal height for the caregiver and for transfers.

One bed can be used for 76" and 80" lengths using the adjustable brackets to meet space limitations and improve inventory management. No extension kit is necessary.

Resident friendly, quiet, smooth operation keeps bed level and balanced at all times using three DC motors.

360 degree mobility at ANY height – can move from room to room at any height, and move over thresholds at even the lowest position.

Mattress retainer is standard.

Reinforced, robust base is designed for support yet provides sufficient underbed clearance, ideal for using overbed tables and patient lifts.

Easy assembly requires only a Phillips head screwdriver.

Four Locking Casters secure the bed at any height.

New keyed Wall Saver is standard – easily moves over thresholds during transport, yet automatically falls back into place to protect your walls. Wallsaver adjusts easily when modifying bed from 76" to 80" and when using a trapeze.

Pendant Hand Control – Easy operation contoured Hand Control Pendant is shock-resistant, water-proof and durable. Holster conveniently secures to bedrails and assist devices for easy access.

Highest Safety and Quality Standards
Built to conform to UL 60601-1 and IEC601-2-38, CAN/CSA C22.2 No. 601.1 the Liberty Bed offers the following ensuring the utmost resident and staff safety:

No pinch points within 200mm of bed perimeter

Rolling clearance of 20mm over thresholds

Splash-proof electronics

Load capacity and tip-stability testing

And For Infection Control…
Introducing SilverSolutions!

Superior, high efficacy that protects painted surfaces

Antimicrobial kills more than 99.9% of odor and stain causing bacteria

Lasts for the expected life of the bed

Non-allergenic and safe for the environment

High concentration of silver ions gives high efficacy

Requires no special handling

A cost-effective solution that is built-in to last

Accessories & Options
Optional Trapeze Adapter and Trapeze attaches easily to headboard to position trapeze within easy reach of residents.
Optional Battery Backup Provides the ability to perform bed functions in the event of power outage.
Optional Half Length Assist Device and Assist Bar Half length assist device and assist bar provide a sturdy and secure handhold to assist residents in and out of bed. Assist devices are removable without tools and meet FDA Entrapment Guidelines.

Basic American Liberty Bed Specifications
Additional Features Include:
- Electrostatic powder-coated antimicrobial bed surface provides longer lasting, durable finish

Mattress Deck Length	76"or 80"
Mattress Deck Width	35"
Overall Bed Length	85.5" with bumper
Overall Bed Width	39.75" with rails/assist devices
Maximum back angle	70°
Maximum knee angle	30°
Maximum height	24.4"
Minimum height	9.9"
Safe Workload (including resident, support surface, head/foot boards, and accessories)

Flex Bed™

• Hi-Lo Manual and Full-Electric available.
• Available in 76" and 80" sleep deck lengths.
• Low position 14.5", maximum height 26".
• Available with spring or pan sleep deck.
• Stabilizing legs standard.
• Durable powder-coated epoxy finish.
• 450 lb weight capacity.
• UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
• Warranty:
1. Electronics: 2 Years
2. All other components: 15 Years

The Flex and all Long Term Care beds are sold a la carte; Head and Foot Boards, Assist Devices, mattresses and options/accessories are sold separately.

Additional Information

Product Documents

Flex Bed.pdf

Matrix II™

The new Matrix II is the latest addition to the innovative line of Basic American beds that offers a high quality bed with features to meet your resident long-term care needs while addressing pricing concerns. The Matrix II is designed with a superior grid deck sleep surface that provides the upmost security for your residents. With features such as adjustable hi-lo bed height adjustment and easy mobility, the Matrix II provides an ideal solution that meets both your resident and caregiver needs at an affordable price.

Features:

Patented design keeps bed level and balanced at all times providing a more comfortable, restful sleep

Strong Grid deck is superior to old-fashioned spring link designs. Structural crossmembers offer a “nosag” mattress support surface that provides the ultimate support and is easy to clean and disinfect

Quiet, powerful and smooth operation by using only three DC motors – a peaceful operation and savings in maintenance cost versus traditional four or more motors

Smooth, rapid height adjustment from a low 8.95" to 25" enhancing efficiency and reducing staff injury due to faster adjustment for proper resident care

Straight vertical travel takes up less room space and keeps your walls scratch free

360 degree mobility at ANY height – can move from room to room at any height, even the lowest

Structured Base provides a reinforced, robust, base that is designed for support yet offers sufficient underbed clearance, ideal for using overbed tables and patient lifts

Leg lift system is optional feature used for improving comfort for residents with edema and poor leg circulation

Lok-n-Roll option provides a one-step locking system that is easily accessible even with low bed height

Highest Safety and Quality Standards
Built to conform to UL 60601-1 and IEC601-2-38, CAN/CSA C22.2 No. 601.1 the Liberty Bed offers the following ensuring the utmost resident and staff safety:

No pinch points within 200mm of bed perimeter

Rolling clearance of 20mm over thresholds

Splash-proof electronics

Load capacity and tip-stability testing

And For Infection Control…
Introducing SilverSolutions!

Superior, high efficacy that protects painted surfaces

Antimicrobial kills more than 99.9% of odor and stain causing bacteria

Lasts for the expected life of the bed

Non-allergenic and safe for the environment

High concentration of silver ions gives high efficacy

Requires no special handling

A cost-effective solution that is built-in to last

Accessories & Options
Extension Kit - The 4" extender is designed to extend the sleep surface an extra 4 inches. This allows the use of the 84" mattress on an 80"deck, or an 80" mattress on a 76" deck.
Trapeze & Trapeze Adapter - Trapeze is adjustable to accommodate residents’ reach. Adapter allows for easy attachment of trapeze system to headboard.
Pendant Hand Control - Easy operation contoured Hand Control Pendant is shock-resistant, water-proof and durable. Holster conveniently secures to bedrails and assist devices for easy access. Backlit hand control with underbed light is optional.
Half Length Assist Device and Assist Bar provide a sturdy and secure handhold to assist residents in and out of bed. Assist devices are removable without tools and meet FDA Entrapment Guidelines providing upmost security for residents.
Wall Saver Baseboard & Side Bumpers - Both Wall Saver Baseboard and Side Bumpers provide wall protection and eliminate the need for rollers.
Overbed Tables & Patient Lifts - Underbed clearance allows for easy use of overbed tables & patient lifts.

Basic American Matrix II™ Specifications
Additional Features Include:
– High Quality UL 60601, IEC601-2-38, CAN/CSA C22.2

No. 601.1 compliance meets the highest global safety standards for electrical medical equipment

– Electrostatic powder-coated antimicrobial bed surface provides a longer-lasting, durable finish
– Grounded – Standard Hospital Grade
– Comes standard with Corner Mattress Retainers
– U.S. Patents - US 7,421,748 1
– Multiple Patents Pending

Növus™

The Növus offers you many of the features of a top-of-the-line full-electric bed, at an economical value, for your long term care needs. Affordability, safety features, durability, and innovative design are all included with the Növus, maintaining the level of quality bed you’ve come to expect from Basic American. The independent and simultaneous operation of the head, knee and hi-lo functions provides a multitude of bed positions for the ultimate in resident comfort and care.

Features:

Patent-pending design keeps bed level and balanced at all times, providing a more comfortable, restful sleep

Quiet, powerful, smooth operation by using only three DC motors – a smooth operation and savings in maintenance cost versus the traditional use of four or more motors

Smooth, rapid height adjustment from a low 8.95'' to high 30" improves efficiency and reduces the risk of staff injury due to faster height adjustment for proper resident care

Strong Grid deck is superior to old-fashioned spring link designs. Structural crossmembers offer a “no-sag” mattress support surface

Straight vertical travel takes up less room space

360 degree mobility at ANY height – can move from room to room at any height, even the lowest

Structured Base provides a reinforced, robust base that is designed for support, yet offers sufficient underbed clearance, ideal for using overbed tables and patient lifts

Adjustable Leg lift system comes standard withNövus,improving comfort for residents afflicted by edema and poor leg circulation

Standard Caster Lock System or Lok-n-Roll option provides a one-step locking system that is easily accessible even with low bed height

Highest Safety and Quality Standards
Built to conform to UL 60601-1 and IEC601-2-38, CAN/CSA C22.2 No. 601.1 the Liberty Bed offers the following ensuring the utmost resident and staff safety:

No pinch points within 200mm of bed perimeter

Rolling clearance of 20mm over thresholds

Splash-proof electronics

Load capacity and tip-stability testing

And For Infection Control…
Introducing SilverSolutions!

Superior, high efficacy that protects painted surfaces

Antimicrobial kills more than 99.9% of odor and stain causing bacteria

Lasts for the expected life of the bed

Non-allergenic and safe for the environment

High concentration of silver ions gives high efficacy

Requires no special handling

A cost-effective solution that is built-in to last

Accessories & Options
Extension Kit - The 4" extender is designed to extend the sleep surface an extra 4 inches. This allows the use of the 84" mattress on an 80"deck, or an 80" mattress on a 76" deck.
Trapeze & Trapeze Adapter - Trapeze is adjustable to accommodate residents’ reach. Adapter allows for easy attachment of trapeze system to headboard.
Pendant Hand Control - Easy operation contoured Hand Control Pendant is shock-resistant, water-proof and durable. Holster conveniently secures to bedrails and assist devices for easy access. Backlit hand control with underbed light is optional.
Half Length Assist Device and Assist Bar provide a sturdy and secure handhold to assist residents in and out of bed. Assist devices are removable without tools and meet FDA Entrapment Guidelines providing upmost security for residents.
Wall Saver Baseboard & Side Bumpers - Both Wall Saver Baseboard and Side Bumpers provide wall protection and eliminate the need for rollers.
Overbed Tables & Patient Lifts - Underbed clearance allows for easy use of overbed tables & patient lifts.

Basic American Növus™ Specifications
Additional Features Include:
– High Quality UL 60601, IEC601-2-38, CAN/CSA C22.2

No. 601.1 compliance meets the highest global safety standards for electrical medical equipment

– Electrostatic powder-coated antimicrobial bed surface provides a longer-lasting, durable finish
– Hospital Grade Grounded Plug is Standard
– Comes standard with Corner Mattress Retainers
– U.S. Patents - US 7,421,748 1
– Multiple Patents Pending

Zenith Z3™

he Zenith Z3, developed with both resident and caregiver in mind, is raising the bar in Long Term Care beds. While incorporating many of the same top quality features you’ve come to expect with the Zenith beds, the new Zenith Z3 now offers unprecedented, advanced positioning speed that is faster than most of the competition - thus saving time and reducing staff occupational injury when adjusting beds for resident care. With its superior design and quiet operation, the new Zenith Z3provides speed, safety, and the solution from a name you’ve come to trust.

Features:

Patent pending Dual Tie-Bar design keeps bed level and balanced at all times providing a more comfortable, restful sleep

Unprecedented positioning speed allows for bed positioning from a low 7.9" to 30" in as little as 26 seconds

Strong Supportive grid deck is superior in frame design and offers a “no-sag” mattress support surface

Virtually 100% vertical movement allows bed to take up less room space

Industry leading Z-lok foot caster base with easy access one step red-green pedal locking system to maximize security, mobility, and when locked can be seen from a distance

360 Degree Mobility at ANY height – can move from room to room at any height even the lowest

Quiet, Smooth operation by using 4 DC motors

Adjustable Leg lift system comes standard with Z3 for improving comfort for residents with edema and poor leg circulation

Wall Saver Bumper comes standard and eliminates the need for rollers that damage walls

Customized headboards and footboards are available in a variety of styles and finishes to compliment any room décor

Highest Safety and Quality Standards
Built to conform to UL 60601-1 and IEC601-2-38, CAN/CSA C22.2 No. 601.1 the Liberty Bed offers the following ensuring the utmost resident and staff safety:

No pinch points within 200mm of bed perimeter

Rolling clearance of 20mm over thresholds

Splash-proof electronics

Load capacity and tip-stability testing

And For Infection Control…
Introducing SilverSolutions!

Superior, high efficacy that protects painted surfaces

Antimicrobial kills more than 99.9% of odor and stain causing bacteria

Lasts for the expected life of the bed

Non-allergenic and safe for the environment

High concentration of silver ions gives high efficacy

Requires no special handling

A cost-effective solution that is built-in to last

Accessories & Options
Zfast - With ZFast, average speed for positioning is 1"/second at full 500 lb capacity. ZFast can reduce the chance for staff injury by reducing any bending and physical strain and improve resident care.
Extension Kit - Transform your bed to 84” improving inventory management of beds. Extension accommodates for a more broad range of resident heights.
Trapeze adapter allows for easy attachment of trapeze system to headboard with easy reach for residents.
Pendant Hand Control - Easy operation contoured Hand Control Pendant is shock-resistant, water-proof and durable. Holster conveniently secures to bedrails and assist devices for easy access. Backlit hand control with underbed light is optional.
Staff Control - Optional Embedded Staff Control allows staff to operate bed functions from the footboard. Staff can restrict access to the resident by locking out control from the resident pendant.
Half Length Assist Device and Assist Bar provide a sturdy and secure handhold to assist residents in and out of bed. Assist devices are removable without tools and meet FDA Entrapment Guidelines.